NEC LT240K User Manual

Page 89

E-89

USING ON-SCREEN MENU

Menu Descriptions & Functions

NOTE:

When "Resolution" is set to "Native", "Overscan", "3D Reform", "Aspect

Ratio" and "Screen" are not available.

While you are displaying an image with higher resolution than the

projector’s native resolution, "Resolution" is not available.

Selecting Overscan Percentage

Select overscan percentage (0%, 5%, 10% and 25%) for signal.

NOTE: When "Resolution" is set to "Native", this feature is not available, and

the stored settings and adjustments are invalid.

NOTE: When "4:3 Fill" or "Crop" is selected in "Aspect Ratio", this feature is

not available.

Selecting Video Filter Level (not available for Video, Viewer and LAN)

This function reduces video noise.

Off ................... The filter is removed.

Less ................ The low-pass filter is applied partially.

More ................ The low-pass filter is applied fully.

Selecting Noise Reduction Level (not available for RGB, Viewer and LAN)

Select one of the three levels for reducing video noise: Low, Medium or

High.

NOTE: The lower the Noise Reduction level, the better the image quality by

way of higher video bandwidth.

This manual is related to the following products: