Installation and connections, Making connections, E-33 – NEC LT240K User Manual
Page 33: Connecting your vcr or laser disc player
E-33
INSTALLATION AND CONNECTIONS
Ͼ
Making Connections
VCR/ Laser disc player
Connecting Your VCR or Laser Disc Player
VIDEO IN
S-VIDEO IN
AUDIO OUT
R
L
VIDEO OUT
S-VIDEO OUT
AUDIO IN
L
R
Audio equipment
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
Use common RCA cables (not provided) to connect your VCR, laser disc
player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or docu-
ment camera.
2. Connect one end of your RCA cable to the video output connector on the
back of your VCR or laser disc player, connect the other end to the Video
input on your projector. Use an audio cable (not supplied) to connect the
audio from your VCR or laser disc player to your audio equipment (if
your VCR or laser disc player has this capability). Be careful to keep your
right and left channel connections correct for stereo sound.