Nokia 232N - Manual (Page 30)

NOTE: Duplicate names are not allowed (i.e. you may
store any particular name in only one memory location).
If you attempt to store a name which is already stored
in another memory location (e.g. move it) the message
MOVE NAME? will remind you that the name already
exists. If you accept this, and store the contents in the
new location, the original name
and number will be
erased.
To move a name and number (e.g. from location 14
to 25):
³
Press RCL 14 (or, alternatively, you may press
ABC to select alpha mode, enter the name stored
in location 14, and press RCL ).
·
Press STO 25 . If location 25 is empty, MOVE
NAME? will be displayed (if it is occupied,
LOCATION FULL will be displayed; in this
instance choose another location, e.g. press
STO 26 to store in location 26).
»
Press STO to move both name and number.
The message STORED will be displayed.
If you are ‘moving’ only a number (i.e. the name part is
empty) to an occupied location, the message
REPLACE CONTENT? will be displayed; press STO
to overwrite the contents, and copy the number.
RECALLING INFORMATION BY MEMORY
LOCATION NUMBER
³
Enter a memory location number then press RCL
(e.g. for location 1 press 1 RCL , or for location 12
press 12 RCL ).
The phone number stored in that memory location will
be displayed. If the memory location is empty, the
message
EMPTY will appear.
·
To check the name stored in the same memory
location, press
ABC . If no name was stored with
the number, the message NAME? will be dis-
played. To return to the number, press ABC again.
»
To call the number in the memory location, with
either the number or the name displayed, press
SEND .
26