Nokia 232N - Manual (Page 15)

BASIC FUNCTIONS
RECEIVING A CALL
³
Press any key except ON or the volume keys.
An incoming call is denoted by a ringing tone, and the
CALL message flashing on the display.
If the SILENT SERVICE option (Menu 6) has been
selected there will be no ringing tone; the keypad and
display lights will flash instead, and only a short beep
will be heard (refer to ‘Ringing volume (Menu 6)’,
page 39).
If you do not answer a call, the CALL message will
remain on the display (indicating a missed call); to
clear the display, press any key.
‘Any-key answering’ facility: Any key (except ON or
the volume keys) may be pressed to answer a call
(except when ‘keyguard’ is active). If ‘keyguard’ is
active, you must press the
SEND key to answer the
call. If you receive a call while entering a number, the
call will be answered on the first keypress after the
ringing starts.
·
To end the call, press END .
CALLER ID
Some network providers have introduced Caller ID in
their markets. This automatic feature displays the
phone number of the calling party before you answer
the call. The phone also looks for a matching number
in its directory, and if found, displays the associated
name. If the Caller ID information is not available the
phone displays
NUMBER UNAVAIL. The phone
displays NUMBER RESTRICT when the caller
withholds the Caller ID information.
MAKING A CALL
³
For best reception, pull the
antenna up to extend fully.
Do not leave the antenna
partly extended.
·
Enter the number you wish
to dial. Remember to
include the area code
11