Nortel Networks NN44200-313 - Manual (Page 40)

40 CallPilot server preinstallation
• monitor
• keyboard
• mouse
• USB modem
• Tandberg tape drive
• tapes
• SCSI cable
• power cords
Place the peripheral devices in a safe, secure area near the
installation site.
4 Open the software package and check that the following software is
included:
• CallPilot image DVD for your system
• CallPilot service Update/PEP CD
• CallPilot Application CD
• CallPilot Desktop CD
• CallPilot My CallPilot CD
• CallPilot Language Prompts CDs (3)
• CallPilot Documentation CD
• printed DTR documentation
Place the software in a safe, secure area near the installation site.
5 Inspect the server and peripheral devices. Do not discard the
CallPilot server box in case a return is necessary.
6 Locate the external SCSI terminator (included loose within the server
shipping carton). Connect the terminator to the rear SCSI port.
—End—
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.