Nortel Networks NN44200-313 - Manual (Page 37)

37
CallPilot server preinstallation
This task describes the CallPilot server preinstallation.
Recommended tools
• The following is a list of recommended tools for the job:
— antistatic ESD wrist strap kit
— cordless power drill with various Phillips, Robertson, and nut driver
bits
— hand-held Phillips, Robertson and standard screwdrivers in various
sizes
— handheld hex nut drivers
— needle-nosed pliers
— tweezers
— tape measure
— flashlight
— cable tie wraps (various lengths, mainly small ones required)
— side cutters
— utility knife or box cutter
— RJ45 crimper with various dyes (if making phone and Ethernet
cables)
— null modem serial cable (for troubleshooting purposes)
— cable identification labels
— equipment log, to record system information (for example, model,
serial number, and installed options)
— pen and note pad
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.