Nortel Networks M3901 - Manual (Page 82)

74
Meridian SL-100 CLASS Features
Automatic Recall
The Automatic Recall feature allows you to enter a Feature Access Code (FAC)
that will automatically set up a call to the last incoming call on your Directory
Number (DN). Check with your network administrator regarding the availability
of this feature.
To activate Automatic Recall:
1. Press the Line (DN) Key.
2. Dial the Automatic Recall Activate
FAC.
An announcement may provide
additional instructions or announce the
number of the last incoming call and
provide you with a choice of whether
or not to continue with the recall.
If you continue the recall, the
Automatic Recall feature will dial the
last number that called you. If the
number is busy, Automatic Recall will
continue trying until the line is idle.
When both your line and the called
party’s line are idle, your telephone
will ring.
3. When the telephone rings, lift the
handset .
You will hear normal ringback/ring
tone.
To cancel Automatic Recall:
1. Press the Line (DN) Key.
2. Dial the Automatic Recall Deactivate
FAC.
Note: Availability of this feature is
dependent upon your Meridian SL-100
system software and network connections.
2498
2498