Use speed call (m3903 and m3904) – Nortel Networks M3901 User Manual

Page 29

Make a call

Use Speed Call (M3903 and M3904)

The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit access code. Contact your network
administrator to determine the capacity of your Speed Call list. This will establish
the number of digits you will enter for each access code.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.

To store or change a Speed Call
number:

1. Press the

Speed Call Controller

Key.

The screen displays Enter Code, then
number.

Dial

a one, two, or three digit code.

Use the

Delete

Key if you make a

mistake. Use the

Cancel

Key to leave

the screen without storing a speed call
number.

Note:

A dash is automatically inserted

after the required number of digits have
been entered.

Dial

the associated telephone number.

Use the

Delete

Key if you make a

mistake. Use the

Cancel

Key to leave

the screen without storing a speed call
number.

Note 1:

Dial the access code (if required)

followed by the internal, external, or
long-distance telephone number.

4. Press the

Done

Key to save the code

and number.

To make a Speed Call:

1. Lift the

handset

2. Press the

Speed Call Controller

Key or

the

Speed Call User

Key.

The screen displays Enter code.

SpcCtrl

Done

SpcCtrl

SpcUsr