Nortel Networks M3901 - Manual (Page 68)

60
Additional Call Features
Station Camp-on
Station Camp-on allows you to transfer an external call to a busy extension.
When the busy extension disconnects from its current call, the transferred call will
ring at the now idle extension.
To activate Station Camp-on after
answering an incoming external
telephone call:
1. Press the Transfer Key.
The external party is on hold and you
receive a dial tone. The screen
displays Call on hold, dial number.
2. Dial the internal extension number of
the telephone where the call is to be
transferred.
3. On the M3903 and M3904 only,
press the Connect Key.
Note: The person you called hears a tone,
and you hear ring/ringback signal or
busy/engaged signal (depending on the
options chosen). The external caller hears
ring/ringback signal or music.
4. Replace the handset .
The external caller is now camped-on
to the number you dialed.
Note 1: You cannot camp-on to an
extension that has the Call Waiting feature
configured.
Note 2: If the camped-on call is not
accepted within a specified period of time,
it returns to you or to the Attendant. Contact
you network administrator to determine
where, and after what period of time,
unanswered calls are re-routed
Trans
Connect