Additional call features, Auto dial transfer feature, Use the buzz signal – Nortel Networks M3901 User Manual

Page 60: Auto dial transfer feature use the buzz signal

Additional Call Features

Auto Dial Transfer Feature

Auto Dial Transfer

allows you to use your Auto Dial Key to transmit digits to the

central office after a Trunk Switch Hook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex or
exchange line-type features.

To use Auto Dial Transfer when you
pick up an incoming trunk call:

1. Press the

Centrex Switch Hook Flash

Key and wait for interrupted dial tone.

Note:

On the Meridian SL-100, Press the

Transfer

Key instead of the Centrex Switch

Hook Flash Key. Auto Dial can be used to
transfer calls however, you do not have to
be on a central office trunk call, and the
Centrex Switch Hook Flash key is not
applicable to the Meridian SL-100.

2. Press the

Auto Dial

Key to call the

number desired.

3. Press the

Goodbye

Key to end the call.

Use the buzz signal

Buzz

allows one person, whose telephone is linked to another telephone, to signal

the other telephone. The person signaled hears a buzz. Use this feature to notify
the other person of a call, a visitor, or a request.

To buzz the telephone linked to
yours:

Press the

Buzz

Key.

The telephone linked to yours, buzzes
as long as you hold down the key.

Note:

Buzz signal is not available on the

Meridian SL-100.

CentrexSHF

AutoDial

Goodbye

Buzz