While on an active call, Place a call on hold, Transfer a call (m3902) – Nortel Networks M3901 User Manual

Page 33: Place a call on hold transfer a call (m3902)

While on an active call

This section describes features that you can use while on an active call.

Place a call on Hold

Use the Hold feature when you are talking with one party and a second call
comes in on a second line. You can answer the second call and retain the original
call by putting it on Hold.

To place a call on Hold:

Press the

Hold

Key.

The LCD indicator

flashes beside the

line on hold.

Note 1:

If the Automatic Hold feature is

configured for your Meridian 1, the active
call is automatically put on hold when you
answer the second call.

Note 2:

On the Meridian SL-100

Automatic Hold is the default feature.

Note 3:

The caller hears music while on

hold, if the Music on Hold feature is
configured for your system.

To retrieve a call on hold:

Press the

Line

(DN) Key beside the

flashing LCD indicator.

Transfer a call (M3902)

Use the Transfer feature to redirect a call to a third party.

To use the Transfer feature:

1. Press the

Transfer

Key.

The other party is on hold and you
receive dial tone. The LED indicator
light flashes steadily.

Dial

the number of the telephone

where the call is to be transferred.

Hold

2637

Transfer