Niles Audio A4.6Ci - Manual (Page 59)

Worksheet #5, Zone On/Off and System On/Off Sequence Programming
Worksheet #5 documents the steps of the sequences that occur whenever a zone first turns on and when the
zone turns off. Identify where the IR commands were programmed by using their page and key address. Copy
the worksheet as needed to document zone sequences for the Master A4.6Ci and all the Slaves in your system.
It also documents the steps of the sequences that occur whenever the system turns on and when it turns off. The
System On/Off Sequence is controlled by the Master A4.6Ci only.
59
PROGRAMMING OVERVIEW
1 JOB TITLE 2 SYSTEM DESIGNER
Document the customer’s name. Document the system designer’s name.
Mr. Smith John Doe
(CHOOSE ONE)
❏ MASTER ❏ SLAVE 1 ❏ SLAVE 2 ❏ SLAVE 3 ZONE # 3
• Check a box to indicate if it is the Master or Slaves 1-3.
• Zone number
STEP PAGE DESCRIPTION
1
2
3
4
5
ZONE ON SEQUENCE
KEY STEP PAGE DESCRIPTION
1
2
3
4
5
ZONE OFF SEQUENCE
KEY
3
B
The steps in the Zone On and Zone Off sequences:
• Describe the IR commands, or indicate if there are delays.
• Page and key address where the IR commands are stored.
STEP PAGE DESCRIPTION
1
2
3
4
5
SYSTEM ON SEQUENCE
KEY STEP PAGE DESCRIPTION
1
2
3
4
5
SYSTEM OFF SEQUENCE
KEY
❏ MASTER (THE SYSTEM ON/OFF SEQUENCE IS PROGRAMMABLE FOR THE MASTER A4.6CI ONLY) 4 x
The steps in the System On and System Off sequences:
• Describe the IR commands, or indicate if there are delays.
• Page and key address where the IR commands are stored.
3
A