Niles Audio A4.6Ci - Manual (Page 49)

SYSTEM-INSTALLATION SCHEMATICS
The first information to document is the makeup of your system. Establish how many zones are involved, and
the number of preamplifiers in your system. Next, determine how many zones have more than one room, requir-
ing the use of an expander. From this information, you will know which sheets to fill out and how many of each
you will need. Use a pencil when completing the sheets. If you need additional sheets, make photocopies.
Following pages are detailed descriptions of the schematic sheets:
Master Preamplifier Installation Schematic
If your system has only six zones and each zone has one room, you can document the necessary information in
just one Preamp Schematic sheet (Figure 43). If your system has more than one A4.6Ci, use the Slave Preamplifier
Installation Schematic for the Slave(s).
49
PROGRAMMING OVERVIEW
1 JOB TITLE 2 SYSTEM DESIGNER
Document the customer’s name. Document the system designer’s name.
Mr. Smith John Doe
3
4
SOURCE
3
1
2
FLASHER
AUDIO INPUTS
BRAND/MODEL SOURCE
A
B
C
D
SOURCE
4
SYNC INPUTS
1
❏ VIDEO ❏ 12V
SYNC
2
TYPE
❏ VIDEO ❏ 12V
SOURCE
❏ YES ❏ NO
❏ YES ❏ NO
5
PAGING DEVICE
❏ YES ❏ NO
Ci Net ™ C ONNECTIONS
FROM
TO
6
7 HOME THEATER SYNC
❏ YES ❏ NO
HOME THEATER IR
❏ YES ❏ NO
Your system can have up to four sources.
Document their brand and model, listing them
according to their flasher connections. The four
flashers are already identified in the panel cor-
responding to A, B, C, and D, respectively.
Denon / DVD 2800
Sync Inputs for Sources 1 and 2
Syncing source 1? (YES/NO)
Syncing source 2? (YES/NO)
If yes,
What type of sync for source 1? (VIDEO/12V)
What type of sync for source 2? (VIDEO/12V)
8
VOLTAGE ACTIVATED DEVICE
❏ YES ❏ NO
Paging Device? (YES/NO)
FROM/TO If you are going to expand the system,
document the Ci Net connection.
Do you have Home Theater sync? (YES/NO)
Is IR coming in from the Home Theater?
(YES/NO)
Are you triggering a voltage activated device?
(YES/NO)