Niles Audio A4.6Ci - Manual (Page 50)

50
PROGRAMMING OVERVIEW
9
MASTER A4.6Ci
1
3
4
2
ZONE ALL ON / PAGE
5
6
❏
❏
❏
❏
❏
❏
SOURCE
10
CASCADE OUTPUT
❏ YES ❏ NO
1
3
4
2
SOURCE DESTINATION
SOURCE
11
ZONE OUTPUT
❏ RCA ❏ DB-25
1
3
4
2
ZONE AMPLIFIER
5
6
SETTING
FIXED / VARIABLE
❏ ❏
❏ ❏
❏ ❏
❏ ❏
❏ ❏
❏ ❏
/
/
/
/
/
/
DIP switches on the front panel
determine which zones will be
enabled to the
ALL-ON and PAGE features.
Check those that have been
enabled to the ALL-ON/PAGE
feature.
Does your system include other preamps or a Home
Theater? (YES/NO)
If yes, specify where the cascade output is going (for
example, a Home Theater or Slave 1).
Indicate if using either RCA or DB-25 to connect to the amplifiers
Then list the brand and model of the amplifier to which it is going.
MASTER KEYPAD MODULE
( CHOOSE ONE )
❏ SOLO ❏ SELECT
❏ INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
❏ NUMERIC
❏ TRANSPORT
❏ IR SENSOR
ZONE# 1
ZONE NAME
MASTER KEYPAD MODULE
( CHOOSE ONE )
❏ SOLO ❏ SELECT
❏ INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
❏ NUMERIC
❏ TRANSPORT
❏ IR SENSOR
ZONE# 2
ZONE NAME
MASTER KEYPAD MODULE
( CHOOSE ONE )
❏ SOLO ❏ SELECT
❏ INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
❏ NUMERIC
❏ TRANSPORT
❏ IR SENSOR
ZONE# 3
ZONE NAME
❏ SOLO ❏ SELECT
❏ INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
❏ TRANSPORT
❏ IR SENSOR
ZONE# 4
ZONE NAME
❏ SOLO ❏ SELECT
❏ INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
❏ NUMERIC
❏ TRANSPORT
❏ IR SENSOR
ZONE# 5
ZONE NAME
❏ SOLO ❏ SELECT
❏ INPUT EXPANDER
OPTIONAL ACCESSORY
MODULES
❏ NUMERIC
❏ TRANSPORT
❏ IR SENSOR
ZONE# 6
ZONE NAME
❏ NUMERIC
FROM EXPANDER # FROM EXPANDER # FROM EXPANDER # FROM EXPANDER # FROM EXPANDER # FROM EXPANDER #
12
ZONE SETUP
MASTER KEYPAD MODULE
( CHOOSE ONE )
MASTER KEYPAD MODULE
( CHOOSE ONE )
MASTER KEYPAD MODULE
( CHOOSE ONE )
Keypad Input Information:
• Check if a Master Key Module was installed (Solo ™ /Select ™ ) or if zone has an expander (expanded zones have more than one
keypad or more than one room).
• Indicate any optional accessory module used (Numeric, ™ Transport, ™ or IR sensor).
• Zones are pre-numbered for the Master preamp (1 through 6).
• Zone name
• If zone has an expander, indicate number. The expander should be numbered the same as the zone to which it is connected,
since each zone has a unique number. (For example, Zone 6 would have Expander #6).
For zones that require more than three keypads, install two expanders. These become "A and B." (For example, two expanders in
Zone 6 would be Expander 6A and Expander 6B).