Niles Audio A4.6Ci - Manual (Page 10)

LED Zone ON/OFF Indicators
Provides individual ON/OFF indication for each
zone.
Zone Label Slots
Coined slots for placing included room labels,
providing zone identification.
Removable Programming Cover
Conceals installer-programming controls.
Programming Controls and Indicators
Push buttons and LED prompts for system and IR
programming.
Zone ALL ON/PAGE Enable Switches
Individual DIP switches to enable or disable system-
wide All ON commands and the paging feature for
particular zones.
Sensor for IR Capture
IR sensor for capturing IR commands for control of
the connected source components.
DB-9 Computer Interface
PC connection enabling program configuration back-
up/downloading.
RJ-45 Connection for Programming Keypad
RJ-45 connection used for Master and Accessory Keypad
Modules providing manual system programming.
Zone Audio Outputs
Six pairs of stereo RCA jacks provide output connec-
tions for the external amplifier.
Paging Input
A mono RCA input for a paging signal from a
telephone system.
Flasher Outputs
Three 3.5mm jacks provide an output connection for
IRC-2P Micro Flashers, one for each connected
source component. A fourth is designed for the
IRC-1P Flood Flasher.
Keypad Inputs
Six female RJ-45 jacks are used for the connection of
the IntelliPad Ci Master Keypad Modules.
Audio Inputs with Buffered Cascade Output
Four pairs of stereo RCA jacks provide input connec-
tions for source components. Each input has a
respective buffered cascade output for distributing
audio signals for expanded systems.
DB25 Zone Output
A DB-25 Output Connector provides six zoned
stereo output signals using a single cable for connec-
tion to Niles Multi-Channel Amplifiers equipped with
a DB-25 Input Connector.
IR Input
A single 3.5mm jack provides an input connection
for IR commands sent from a Home Theater. These
IR commands are used for control of source equip-
ment shared with an A4.6Ci.
12V Control Output
A single 3.5mm jack provides a 12V DC trigger
signal for use with voltage-triggered AC power strips
(i.e., Niles AC-3) to control source components
requiring activation via a switched AC outlet.
Sync Inputs
Video and voltage sensing inputs 1and 2 are for detect-
ing when a source component is on/off for reliable
system activation. The HT Sync Input senses voltage,
determining the on/off status of a Home Theater that
shares source components with the A4.6Ci.
16V DC Power Input
Power connection for use with included AC-to-DC
in-line power adapter.
10
PARTS GUIDE (A4.6Ci)