Niles Audio A4.6Ci - Manual (Page 55)

SYSTEM PROGRAMMING WORKSHEETS
After documenting what is being installed (every keypad, every expander, every zone, every preamp), you can
now document all IR programming used in the system. Following are detailed descriptions of the six
Programming Worksheets.
Worksheet #1, Source Power IR and Master Key Setup
Worksheet #1 documents which source components need to have their power command programmed into the
preamp. You can also identify which ones have a single power command, and which ones have discrete on/off
commands.
55
PROGRAMMING OVERVIEW
1 JOB TITLE 2 SYSTEM DESIGNER
Document the customer’s name. Document the system designer’s name.
Mr. Smith John Doe
3
PROGRAM SOURCE COMPONENT POWER – MASTER A4.6Ci
SOURCE 1 BRAND: _____________________________ MODEL: _____________________________
COMPONENT SYNC
❏ Yes ❏ No If Yes, SYNC TYPE:
❏ Video
❏ 12V
POWER PROGRAMMING
❏ Single “Power” IR Command
❏ Two Separate ON and OFF IR Commands
❏ Latching Power
• SOURCE 1 and SOURCE 2
Transfer the information in box 3 and box 4 of the Master Preamp Schematic to identify the brand and model of each source,
then indicate if the components have sync (yes/no), and if yes, the sync type (video/12V).
Power programming: Check if single "power" IR command, two separate ON/OFF IR commands, or latching power
• SOURCE 3 and SOURCE 4
Transfer the information in box 3 and box 4 of the Master Preamp Schematic to identify the brand and model of each source,
then indicate if the components have either two separate ON/OFF IR commands or latching power.
Power programming: Check if two separate ON/OFF IR commands or latching power
4
LABEL AND ASSIGN INPUTS TO MASTER KEYS – ALL MASTER & SLAVE A4.6Ci’s
MASTER KEY 1 MASTER KEY LABEL: ________
ASSIGNED SOURCE INPUT: ❏ 1 ❏ 2 ❏ 3 ❏ 4
MASTER KEY 2 MASTER KEY LABEL: ________
ASSIGNED SOURCE INPUT: ❏ 1 ❏ 2 ❏ 3 ❏ 4
Label and assign inputs to Master Keys 1-8
• Label each Master Key (CD, Tuner, DVD, etc.)
• Check the assigned input number (Inputs 1-4)