Shutdown, Shutdown -8 – NETGEAR ReadyNAS 2100 User Manual
Page 96
ReadyNAS 2100 User Manual
5-8
Optimizing Performance and Maintaining the System
v1.1, June 2009
Shutdown
The Shutdown Options screen offers the option to either power off or reboot the ReadyNAS 2100
device. You also have the option of performing either a full file system check or a quota check on
5. SYS
Button.
Diagnostics: To enter the diagnostic boot menu, press and hold the SYS button
while powering the unit on. Keep pressing until all LEDs except the Disk ACT are on.
8. Power
Button.
and
LED
Push button
On (Blue)
Blinking
Off
Power button actions:
• Press once: Power the system on.
• Press twice - preferred shutdown: When the system is running,
initiate preferred shutdown. After the first press, the system blinks
all the LEDs in unison (including the power LED). After the second
button press, the system initiates the shutdown. Doing nothing
while all the LEDs are blinking in unison will let the system resume
operating.
• Press and hold - forced shutdown: If the system is hung, press
and hold the power button for 5 seconds to force shutdown.
LED
• On (blue): Power is supplied to the system.
• Blinking: The system is booting.
• Off: The system is powered off.
Table 5-1. LED Descriptions (continued)
Item
Activity
Description
Boot Menu
Options
USB
LED
Disk LED
1
2
3
4
Boot menu enabled
On
On
On
On
On
1. Normal boot
Off
On
Off
Off
Off
2. Factory default
Off
Off
On
Off
Off
3. OS Reinstall
Off
Off
Off
On
Off
4. Tech Support
Off
Off
Off
Off
On
5. Skip Volume Check
On
Off
Off
Off
Off
6. Memory Test
On
On
Off
Off
Off
7. Factory Test
On
Off
On
Off
Off