Factory default settings, Appendix a, Default settings and technical specifications – NETGEAR CVG824G User Manual

Page 71

A-1

1.0, November 2006

Appendix A

Default Settings and Technical Specifications

Factory Default Settings

You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.

•

To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in the table below.

•

Pressing the TEST LED for a shorter period of time will simply cause your device to reboot.

Feature

Description

Smart Wizard

Enabled

Gateway Login

Gateway Login URL

http://192.168.0.1

admin

Password

password

Parental login name

superuser

Parental password

password

Internet Connection

WAN MAC Address

Use Default hardware address

MTU Size

1500

Local Network

LAN IP Address (aka Gateway IP address)

192.168.0.1

Gateway Subnet Mask

255.255.255.0

DHCP Server

Enabled

LAN IP Starting IP Address

192.168.0.10