NETGEAR CVG824G - Manual (Page 45)

Wireless Cable Voice Gateway Model CVG824G Reference Manual
Protecting Your Network 3-9
v1.0, November 2006
To forward inbound traffic:
1. Select the service that you want to forward from the drop-down menu of Predefined Services.
If the service that you want to forward is not in the predefined list, you can add a custom
service. Enter the range of ports that you want to forward and select whether the ports are TCP,
UDP or Both.
2. Enter a new Start Port and End Port if you want to change the suggested port numbers.
3. From the drop-down Protocol menu, select the protocol: TCP, UDP, or Both.
4. Enter the IP address of the computer on your network to which you would like to direct the
inbound traffic in the Local IP Address field.
5. Click Add. The new Port Forwarding rule will appear in the Active Forwarding Rules table.
To delete an existing rule:
1. Check the radio button on the left side of the table adjacent to the rule you want to delete.
2. Click Delete to delete the Port Forwarding rule.
Figure 3-6