NETGEAR CVG824G User Manual

Page 58

Text mode
Original mode

Wireless Cable Voice Gateway Model CVG824G Reference Manual

4-6

Managing Your Network

1.0, November 2006

•

Enable the DHCP Server to assign IP addresses to your computers automatically; or
disable the DHCP Server and assign IP addresses to your computers manually.

•

Enter a Starting IP Address for the first of the contiguous addresses in the address pool.
The default start address is 192.168.0.10.

•

Enter an Ending IP Address for the last of the contiguous addresses in the address pool.
The default end address is 192.168.0.19.

3. Click Apply to save your settings.

To configure DHCP server reservation parameters for your LAN:

1. Enter the MAC address of the PC for which you want to reserve an IP Address.

2. Enter a free IP Address for the PC.

Note: If you disable the DHCP server, you must assign a static IP address to your

PC in order to reconnect to the gateway and enable the DHCP server
again.

Figure 4-3