4) menu descriptions & functions [source, Computer 1 and 2, Computer 3 (rgb digital) – NEC NP2250 User Manual

Page 99: Component, Video, S-video, Viewer, Network, Entry list, Menu descriptions & functions [source

6. Using On-Screen Menu

 Menu Descriptions & Functions [SOURCE]

COMPUTER 1 and 2

Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE:

• When the component input signal is connected to the COMPUTER 1, COMPUTER 2 or COMPUTER 3, select [COMPUTER 1],

[COMPUTER 2] or [COMPUTER 3] respectively.

• An optional component cable (Component V or ADP-CV1E cable) is needed for a component signal.

COMPUTER 3 (RGB Digital)

Selects the computer connected to your COMPUTER 3 (DVI-D) connector.

COMPONENT

Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).

VIDEO

Selects what is connected to your VIDEO input-VCR, laser disc player, DVD player or document camera.

S-VIDEO

Selects what is connected to your S-VIDEO input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or

S-Video source.

VIEWER

This feature enables you to make presentations using a USB memory that contains captured images and slides
created with the ArcSoft MediaImpression for NEC contained on the CD-ROM. See the supplied NEC Wired and
Wireless Network Setup Guide for installing the ArcSoft MediaImpression for NEC.
(

→ page

)

NETWORK

Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit.
When a source connected on a network is not made settings, the [NETWORK] menu will be displayed. (

→ page

110

)

ENTRY LIST

Displays a list of signals. See the following pages.