NEC NP2250 User Manual
Page 100
8
6. Using On-Screen Menu
[ENTRY LIST]
Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust-
ment values of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete
(adjustment values of) signals that are no longer needed.
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT
or button on your remote control or the projector cabinet to select any number.
3. Use the SELECT
button to select [STORE] and press the ENTER button.
You can edit signals on the [ENTRY LIST].
LOAD...................... Enables.you.to.select.a.signal.from.the.list.
STORE.................... Enables.you.to.store.the.currently.projected.signal.
CUT......................... Enables.you.to.remove.a.selected.signal.from.the.list.and.place.it.on.the.“clipboard”.in.the.projector.
COPY...................... Enables.you.to.copy.a.selected.signal.from.the.list.and.place.it.on.the.“clipboard”.in.the.projector.
PASTE..................... Enables.you.to.paste.the.signal.placed.on.the.“clipboard”.to.any.other.line.of.the.list.
EDIT........................ Enables.you.to.change.SOURCE.NAME,.INPUT.TERMINAL,.LOCK,.and.SKIP.