NEC NP2250 User Manual

Page 101

SOURCE NAME:
Enter.a.signal.name..Up.to.18.alphanumeric.characters.can.be.used.
INPUT TERMINAL:
Change.the.input.terminal.
LOCK:
Set.so.that.the.selected.signal.cannot.be.deleted.when.[ALL.DELETE].is.executed..After.executing.[LOCK],.

the.changes.cannot.be.saved.
SKIP:
Set.so.that.the.selected.signal.will.be.skipped.during.auto.search.

When.complete,.select.OK.and.press.ENTER..To.exit.without.storing.the.setting,.select.Cancel..Select.

[SOURCE.NAME].and.press.ENTER.to.display.the.Source.Name.Edit.window..You.can.change.source.

name.on.this.window..Press. .to.display.the.software.keyboard,.which.you.can.enter.alphanumeric.

characters..

ALL.DELETE............ This.feature.enables.you.to.delete.all.the.registered.signals.in.the.Entry.List.

PAGE.UP/.PAGE.DOWN.... Enables.you.to.go.to.the.next.page.or.the.previous.page.

The following buttons are not available for the currently projecting signals:

1) The CUT and PASTE buttons on the [ENTRY LIST] screen
2) The INPUT TERMINAL button on the [EDIT] screen

NOTE: When all the signals in the [ENTRY LIST] are deleted, the currently projected signal will be also deleted except locked sig-

nals.

6. Using On-Screen Menu