NEC NP2250 User Manual

Page 116

6. Using On-Screen Menu

Setting a new program timer

1. On the PROGRAM TIMER screen, use the SELECT

 or  button to select [SETTINGS] and press the EN-

TER button.

The [PROGRAM LIST] screen will be displayed.

NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.

2. Select a blank program number and press the ENTER button.

The [EDIT] screen will be displayed.

3. Make settings for each item as required.

ACTIVE..............................Place.a.check.mark.to.enable.the.program.
DAY....................................Select.days.of.the.week.for.the.program..To.execute.the.program.from.Monday.to.Friday,.select.

[MON-FRI].To.execute.the.program.in.everyday.basis,.select.[EVERYDAY].

TIME..................................Set.the.time.to.execute.the.program..Enter.time.in.24-hour.format.
FUNCTION.........................Select.a.function.to.be.executed..Selecting.[POWER].will.allow.you.to.turn.on.or.off.the.projector.

by.setting.[ADVANCED.SETTINGS]..Selecting.[SOURCE].will.allow.you.to.select.a.video.source.by.

setting.[ADVANCED.SETTINGS]..Selecting.[LAMP.MODE].will.allow.you.to.select.either.[NORMAL].

or.[ECO].by.setting.[ADVANCED.SETTINGS].

ADVANCED.SETTINGS.......Select.power.on/off,.a.type.of.video.source,.or.lamp.mode.for.the.selected.item.in.[FUNCTION].
REPEAT..............................Place.a.check.mark.to.repeat.the.program.continuing.basis..To.use.the.program.this.week.only,.

clear.the.check.mark.