NEC NP2250 - Manual (Page 58)

44
4. Convenient Features
Viewing Two Pictures
1. Press the PIP button on the remote control.
The PIP/SIDE BY SIDE SOURCE screen will be displayed.
2. Use the SELECT  or  button to select the source and press the ENTER button.
The PIP screen or SIDE BY SIDE screen will be displayed, depending on which was selected in the [MODE] set-
ting screen.
3. Press the PIP button again to return to the normal screen (single picture).
TIP:
• Selecting another source will return to the normal screen.
• Selecting a source not supported for the main picture or the sub picture will return to the normal screen.
[POSITION]
This option allows you to select the position of a sub picture in the main picture.
NOTE:
• The default setting is [BOTTOM-RIGHT].
Use the SELECT  or  button to select the sub picture’s position and press the ENTER button.
The options are: TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, and BOTTOM-RIGHT.
The following adjustments and settings are available for the main picture only.
- Adjusting picture and sound
- Magnifying a picture
The following operations are available for both the main and sub pictures.
- Picture and audio mute
- Freezing a moving picture