Nortel Networks M760 - Manual (Page 86)

Settings
78
Settings
You can choose the type of melody (16 different melodies) and adjust the volume (8 levels) of
the current ring.
A privilege ring is used to inform you when the correspondents stored in list No. 4 in the pri-
vate directory call you. You can choose the melody and adjust the ring volume.
1 - Press the key.
The display shows " PROGRAMMING".
2 - Press the key until the display shows “ RING”.
3 - Press the key.
The display indicates the current ring melody.
4 - Consecutively press the or keys for access to dif-
ferent settings of the ring.
RING
Choosing and setting
the current ring: When the display indicates «RING MELODY : XX».
- Consecutively press the or keys to choose the type of
current melody. Sixteen different melodies are available.
Note: By default, melody No. 8, is used to inform you when
the correspondents stored in list No. 4 in the private directory
call you. Therefore, we recommend that you choose another
melody as the current melody.
Each time the key is pressed, the corresponding melody is
broadcast and the display indicates its number.
- Press the key.
The display indicates «RING VOLUME : X».
- Consecutively press the or keys to to adjust the
current ring volume.
The volume can be set at 8 levels, including ringing cutoff.
Each time the key is pressed, ringing is broadcast at the new
level and the display indicates this level.
- Press the key to confirm the setting.
Choosing and setting the set ring