Dialing a correspondent – Nortel Networks M760 User Manual

Page 26

Dialing a correspondent

Notify

Enter

The number is busy or does not answer,
- press the

Redial

interactive key (before hanging up).

When the correspondent is no longer busy (if he was busy) or
has re-activated the phone (if he was absent), your telephone
set will ring. When you pick up the handset, your correspon-
dent's telephone set will be redialed and ring.

Using the automatic redial function

1 - Press the

Notify

interactive key.

The display shows the first of the 6 pre-defined messages.

2 - Press the

More

interactive key successively to select

another pre-defined
message - if desired - or to select a blank message entry.
. Depending on the choice you make, you will either have to

complete

the message shown, or

enter a new message

via the alphabetic keypad.

Note: use the alphabetical keypad and its features.

. If you need to correct an entry, press the

Erase

interactive key.

3 - Press the

Enter

interactive key to send the message.

The display prompts you to get back the communication.

4 - Press the

Yes

(example) interactive keys, as desired.

Notes: the pre-defined messages are displayed directly on the
notified corresponden’s set. However, a new message is not
displayed directly: the other correspondent is informed of the
arrival of a writted message, and must choose to read it.

Notifying the correspondent

If the correspondent you are calling does not answer:

Redial

Erase

Suppose you are calling an internal number, and that the number concerned is busy or does not
answer. You can set the number to be called back automatically.

Suppose the correspondent you are calling does not answer. You can send a short message to
the display of his/her telephone set, provided that the said correspondent (internal or external)
is connected to a digital interface.

Desabling Redial
Function

If you want to disable the automatic redial function.
- Press

Funct.

Feature

-->

Memory

Call bk

interactive

keys.
The display shows the memorised number.
- Press the

Cancel

interactive key to desable the redial function.

Enabling automatic
redial:

Cancel