The alarm function – Nortel Networks M760 User Manual
Page 77

The alarm function
69
You can program one or several appointments on your extension using this function.
Your extension will remind you of the appointment at the specified time.
Note: Even if you have forwarded your calls, the appointment reminder will call you
on your extension.
The alarm function
You can record up to four appointments.
1 - Press the
Funct.
interactive key.
The display shows the message "SELECT A FUNCTION".
2 - Press the
Feature
interactive key.
The display shows the message "SELECT A FEATURE".
3 - Press the
Alarm
interactive key
When no other appointments have been recorded, the display
shows the message "APPOINTMENT REMINDER NOT ACTI-
VATED" and appointment no. 1 is offered.
. To choose another number (from 1 to 4), press the
More
interactive key.
4. Press the
Activ.
interactive key
The display prompts you to key in the time of your appointment.
5. Key in the
time of the appointment
between 0000 and 2359
(e.g. 1830 corresponds to 6.30 p.m.)
. Press the
Erase
interactive key if you make a mistake.
6 - Press the
Enter
interactive key to confirm.
The display confirms the programming.
When you have finished press the
red key
twice to return
to idle mode.
At the time of your appointment the telephone will ring
and display “Appointment reminder”.
. Press the
Mute
interactive key to stop the reminder bell.
Programming the alarm function
Funct.
Feature
Alarm
Activ.
Enter
hhmm
More
Erase
Mute
Appointment reminder: