NETGEAR MR814 v3 User Manual
Page 29
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Connecting the Router to the Internet
3-5
202-10039-01
In its factory default state, the router will automatically display the NETGEAR Smart
Wizard configuration assistant welcome page.
Figure 3-5: NETGEAR Smart Wizard configuration assistant
Note: If you do not see this page, clear the browser cache by going to the Internet Explorer
Tools menu, Internet Options, and clicking Delete Files, then selecting the Delete all
offline files check box and clicking Ok.
If you still do not connect, type
http://www.routerlogin.net
in the browser address bar and
click Enter. Otherwise, to bypass this screen, see
“How to Bypass the Configuration
and the
“How to Manually Configure Your Internet Connection”
topics in this chapter.
If you cannot connect to the router, verify your computer networking setup. It should be
set to obtain both IP and DNS server addresses automatically, which is usually so. For help
with this, see
Appendix C, “Preparing Your Network”
or the animated tutorials on the CD.
b.
Click OK. Follow the prompts to proceed with the Smart Wizard configuration assistant to
connect to the Internet.