NETGEAR MR814 v3 User Manual

Page 117

Reference Manual for the MR814 v3 Cable/DSL Wireless Router

Preparing Your Network

C-5

202-10039-01

The Network window opens, which displays a list of installed components:

You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.

If you need to install a new adapter, follow these steps:

Click the Add button.

Select Adapter, and then click Add.

Select the manufacturer and model of your Ethernet adapter, and then click OK.

If you need TCP/IP:

Click the Add button.

Select Protocol, and then click Add.

Select Microsoft.

Note:

It is not necessary to remove any other network components shown in the

Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.