Block devices, Remote sim mode – Nokia 5800EN User Manual
Page 78

Block devices
Select
Menu
>
Settings
and
Connectivity
>
Bluetooth
.
To block a device from establishing a Bluetooth connection
to your device, open the
Paired devices
tab. Tap a device you
want to block, if it is not already highlighted, and select
Options
>
Block
.
To unblock a device, open the
Blocked devices
tab, tap a
device, if it is not already highlighted, and select
Options
>
Delete
.
To unblock all blocked devices, select
Options
>
Delete
all
.
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests from
this device. If you accept the query, the remote device is
added to the list of blocked devices.
Remote SIM mode
Select
Menu
>
Settings
and
Connectivity
>
Bluetooth
.
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode, and set
the other device as authorised.
To use the remote SIM mode with a compatible car kit
accessory, activate Bluetooth connectivity, and enable the
use of the remote SIM mode with your device. Activate the
remote SIM mode from the other device.
When the remote SIM mode is on in your device,
Remote SIM
mode
is displayed in the home screen. The connection to the
wireless network is turned off, as indicated by in the signal
strength indicator area, and you cannot use SIM card services
or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode, you can
only use a compatible connected accessory, such as a car kit,
to make or receive calls. Your wireless device will not make
any calls while in this mode, except to the emergency
numbers programmed into your device. To make calls from
your device, you must leave the remote SIM mode. If the
device is locked, enter the lock code to unlock it.
To leave the remote SIM mode, press the power key, and
select
Exit remote SIM mode
.
USB
Select
Menu
>
Settings
and
Connectivity
>
USB
.
To have the device ask the purpose
of the connection each time a
compatible data cable is
connected, select
Ask on
connection
>
Yes
.
If the
Ask on connection
option is
turned off or you want to change
the mode during an active
connection, select
USB connection
mode
and from the following:
●
PC Suite
— Use Nokia PC
applications such as Nokia Ovi
Suite, and Nokia Software
Updater.
Connectivity
© 2008 Nokia. All rights reserved.
78