Capture and recording settings – Nokia 5800EN User Manual

Page 57

2 — Zoom slider. To turn the zoom slider on and off, tap the

screen.
3 — Capture icon. Tap to capture an image.
4 — Flash mode. Tap to change settings.
5 — Capture settings. Tap to change settings.
6 — Battery charge level indicator
7 — Image resolution indicator
8 — Image counter (the estimated number of images you can

capture using the current image quality setting and available

memory)
9 — Memory in use. Depending on the setup of your device,

there are the following options: device memory ( ), memory

card (

), or mass memory ( ).

10 — GPS signal indicator

Capture and recording settings

To open the capture and recording settings view before

capturing an image or recording a video clip, select

Menu

Applications

Camera

and .

The capture and recording settings view provides you with

shortcuts to different items and settings before capturing an

image or recording a video clip.
The capture and recording settings return to the default

settings after you close the camera.
Select from the following:

— Select the scene.

— Switch between video and image mode.

or — Show or hide the viewfinder grid (images only).

— Activate the self-timer (images only).

— Open Gallery.

Image settings:

— Select a colour effect.

— Adjust the white balance. Select the current lighting

conditions. This allows the camera to reproduce colours more

accurately.

— Adjust the exposure compensation (images only). If

you are shooting a dark subject against a very light

background, such as snow, adjust the exposure to +1 or +2

to compensate for the background brightness. For light

subjects against a dark background, use -1 or -2.

Adjust light sensitivity (images only). Increase the light

sensitivity in low light conditions to avoid too dark images

and blurry images. Increasing the light sensitivity may also

increase the image noise.

Adjust contrast (images only). Adjust the difference

between the lightest and darkest parts of the image.
Adjust sharpness (images only).
The screen display changes to match the settings you define.
The capture settings are shooting-mode specific. Switching

between the modes does not reset the defined settings.

Camera