Nokia 5800EN - Manual (Page 29)

4. Make calls
Proximity sensor
To prevent accidental selections, the touch screen is disabled
automatically during calls when you place the device next to
your ear.
Voice calls
1. In the home screen, select to open the dialler, and
enter the phone number, including the area code. To
remove a number, select C.
For international calls, select * twice for the + character
(which replaces the international access code), and enter
the country code, area code (omit the leading zero if
necessary), and phone number.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if another
application is active.
To make a call from the contacts list, select Menu >
Contacts . Scroll to the desired name. Or, tap the search field
to enter the first letters of the name, and scroll to the name.
To call the contact, press the call key. If you have saved several
numbers for a contact, select the desired number from the
list, and press the call key.
During a call
To mute or unmute the microphone, select or .
To put the call on hold or unhold it, select
or .
Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud. To
activate the loudspeaker, select . If you have attached a
compatible headset with Bluetooth connectivity, to route the
sound to the headset, select Options > Activate BT
handsfree .
To switch back to the handset, select .
To end the call, select
.
To switch between the active and the held call, select .
Tip: When you have only one active voice call, to put
the call on hold, press the call key. To activate the call,
press the call key again.
To send DTMF tone strings (for example, a password), select
Options > Send DTMF . Enter the DTMF string or search for
it in the contacts list. To enter a wait character (w) or a pause
character (p), press * repeatedly. To send the tone, select
OK . You can add DTMF tones to the phone number or DTMF
field in contact details.
To end an active call and replace it by answering the waiting
call, select Options > Replace .
Make calls
© 2008 Nokia. All rights reserved. 29