Pair devices, Receive data using bluetooth connectivity – Nokia 5800EN User Manual
Page 77

computer
phone
audio or video device
other device
To interrupt the search, select
Stop
.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a
passcode. The same passcode must be entered in both
devices.
When the connection is established,
Sending data
is
displayed.
Tip: When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter *#2820#.
Pair devices
Select
Menu
>
Settings
and
Connectivity
>
Bluetooth
.
To pair with compatible devices and view your paired
devices, open the
Paired devices
tab.
Before pairing, create your own passcode (1 to 16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a factory-
set passcode. The passcode is used only once.
1. To pair with a device, select
Options
>
New paired
device
. Devices that are within range are displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device, as well.
3. Some audio accessories connect automatically to your
device after pairing. Otherwise, to connect to an
accessory, select
Options
>
Connect to audio device
.
Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, select from the
following:
●
Set as authorised
— Connections between your device
and the authorised device can be made without your
knowledge. You will not be asked for authorisation or
acceptance separately. Use this status only for your own
devices, such as your compatible headset or PC, or devices
that belong to someone you trust. indicates authorised
devices in the paired devices view.
●
Set as unauthorised
— Connection requests from this
device must be accepted separately every time.
To cancel a pairing with a device, select
Options
>
Delete
.
To cancel all pairings, select
Options
>
Delete all
.
Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is displayed, and the item is
placed in the Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by .
Connectivity
© 2008 Nokia. All rights reserved.
77