Packet data access points, Wlan internet access points – Nokia 5800EN User Manual
Page 73

To change the priority of an access point within the group,
select
Options
>
Organise
>
Change priority
.
Packet data access points
Select
Menu
>
Settings
and
Connectivity
>
Destinations
>
Access point
, and follow the instructions
on the screen.
To edit a packet data access point, open one of the access
point groups, and select an access point marked with
.
Follow the instructions from your service provider.
Select from the following:
●
Access point name
— You obtain the access point name
from your service provider.
●
User name
— The user name may be needed to make a
data connection, and is usually provided by your service
provider.
●
Prompt password
— If you must enter the password
every time you log in to a server, or if you do not want to
save your password in the device, select
Yes
.
●
Password
— A password may be needed to make a data
connection and is usually provided by your service
provider.
●
Authentication
— Select
Secure
to always send your
password encrypted or
Normal
to send your password
encrypted when possible.
●
Homepage
— Depending on the access point you are
setting up, enter the web address or the address of the
multimedia message centre.
●
Use access point
— Select
After confirmation
if you
want the device to ask for confirmation before the
connection using this access point is created, or
Automatically
if you want the device to connect to the
destination using this access point automatically.
Select
Options
>
Advanced settings
and from the
following:
●
Network type
— Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
●
Phone IP address
(for IPv4 only) — Enter the IP address
of your device.
●
DNS addresses
— Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
●
Proxy server address
— Enter the address of the proxy
server.
●
Proxy port number
— Enter the port number of the proxy
server.
WLAN internet access points
Select
Menu
>
Settings
and
Connectivity
>
Destinations
>
Access point
, and follow the instructions
on the screen.
To edit a wireless LAN (WLAN) access point, open one of the
access point groups and select an access point marked with
.
Follow the instructions from your WLAN service provider.
Connectivity
© 2008 Nokia. All rights reserved.
73