Nokia 5800EN - Manual (Page 31)

1. To assign a phone number to one of the number keys,
select Speed dialling .
2. Scroll to the key to which you want to assign the phone
number, and select Options > Assign .
1 is reserved for the voice mailbox.
To call in the home screen, select to open the dialler, select
the assigned key number, and press the call key.
To call in the home screen when speed dialling is active, select
to open the dialler, and tap and hold the assigned key
number.
Call waiting
You can answer a call when you have another call in progress.
To activate call waiting (network service), select
Menu >
Settings and Calling > Call > Call waiting .
1. To answer the waiting call, press the call key. The first call
is put on hold.
2. To switch between the two calls, select Options >
Swap .
3. To connect an incoming call or a call on hold with an active
call, and to disconnect yourself from the calls, select
Options > Transfer .
4. To end the active call, press the end key.
5. To end both calls, select
Options > End all calls .
Voice dialling
Your device supports enhanced voice commands. Enhanced
voice commands are not dependent on the speaker’s voice,
so you do not need to record voice tags in advance. The device
creates a voice tag for the entries in the contacts and
compares the spoken voice tag with it. The voice recognition
in the device adapts to the main user’s voice to recognise the
voice commands better.
The voice tag for a contact is the name that is saved for the
contact. To listen to the synthesised voice tag, select a contact
and Options > Voice tag details . Scroll to a contact detail,
and select Options > Play voice tag .
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1. To start voice dialling, in the home screen, press and hold
the call key. If a compatible headset with the headset key
is attached, press and hold the headset key to start voice
dialling.
2. A short tone sounds, and Speak now is displayed. Say
clearly the name that is saved for the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language, and
Make calls
© 2008 Nokia. All rights reserved. 31