Transferring images to the computer – Nikon S1200PJ User Manual

Page 93

Using ViewNX 2

Play

Transferring Images to the Computer

When transferring pictures to the computer from the camera, select the Interface
setting (

A 100) from the setup menu (A 98) and set the USB option to MTP/

PTP (default setting).

Choose how images will be copied to the computer.

Choose one of the following methods:

• Direct USB connection: Turn the camera off and ensure that the memory card is

inserted in the camera. Connect the camera to the computer using the supplied USB
Cable UC-E6. The camera automatically turns on.

• SD card slot: If your computer is equipped with an SD card slot, the card can be

inserted directly in the slot.

• SD card reader: Connect a card reader (available separately from third-party

suppliers) to the computer and insert the memory card.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

• When using Windows 7

If the dialog shown at right is
displayed, follow the steps
below to select
Nikon Transfer 2.

1 Under Import pictures and

videos, click Change
program. A program
selection dialog will be
displayed; select Import File using Nikon Transfer 2 and click OK.

2 Double-click Import File.

If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.

Connecting the USB Cable

The connection may not be recognized if the camera is connected to the computer via a USB hub.