Nikon S1200PJ - Manual (Page 118)

100
The Setup Menu
G
e
n
e
ral C
a
m
e
ra S
e
tu
p
* This setting can be changed when the projector is in operation (
A 88).
Auto off*
Set time before the monitor turns off for saving power.
The default setting is 1 min.
E 70
Format memory/
Format card
Allows you to format the internal memory (only when a
memory card is not inserted) or the memory card (when a
memory card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
pictures to a computer and save them before
formatting.
E 71
Language Choose the language used for camera monitor display. E 72
Interface
When transferring pictures to the computer or printer from
the camera, set the USB option to MTP/PTP (default
setting) or Projector. Adjust video mode settings for
connection to a television or an other device. Select from
NTSC (default setting) and PAL.
E 73
Charge by
computer
When set to Auto (default setting), you can charge the
camera’s battery by connecting the camera to a computer
(provided that the computer is able to supply power).
• When charging by computer, it takes more time to
charge the battery than when using the Charging AC
Adapter EH-69P. Additionally, when charging by
computer and transferring pictures to the computer, it
takes more time to charge the battery.
E 73
Blink warning
Immediately after taking a picture using face detection
(
A 65) (except when using smart portrait mode), if the
camera detects a subject with closed eyes, the camera
displays the message Did someone blink?, allowing you
to check the picture. The default setting is Off.
E 75
Reset all
Allows you to reset the camera’s settings to their default
values.
Certain settings such as Time zone and date and
Language are not reset.
E 77
Firmware version View the current camera firmware version. E 79
Option Description A