Nikon S1200PJ - Manual (Page 139)

E 21
Refe
rence S
e
cti
o
n
Connecting the Camera to a TV (Playback on a TV)
Connect the camera to a television using the Audio Video Cable EG-CP16
(available separately) to play back pictures on a television.
1
Turn off the camera.
2
Connect the camera to the TV.
• Connect the yellow plug to the video-in jack and the white plug to the audio-in jack
on the TV.
• When connecting the audio/video cable, be sure that the camera connector is
properly oriented. Do not use force when connecting the cable to the camera. When
disconnecting the cable, do not pull the connector at an angle.
3
Tune the television to the video channel.
• See the documentation provided with your television for details.
4
Hold down the
c button to turn on the
camera.
• The camera enters playback mode and pictures are
displayed on the television.
• While connected to the TV, the camera monitor will
remain off.
B
Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television.
Specify the Video mode setting from Interface option (
E 73) in the setup menu (A 98).
White Yellow