Nikon S1200PJ User Manual
Page 217
Troubleshooting
F
13
Te
ch
n
ical N
o
te
s an
d In
de
x
The recorded pictures are
not displayed in auto sort
mode.
• The desired picture was sorted to a category
other than the category currently displayed.
• Pictures recorded by a camera other than the
COOLPIX S1200pj and pictures copied using
the copy option cannot be displayed in auto
sort mode.
• Pictures recorded in internal memory or on
the memory card may not be played back
correctly if overwritten by a computer.
• Up to 999 pictures and movie files can be
added to each category. If the desired
category already contains 999 pictures, new
pictures or movies cannot be added.
–
Nikon Transfer 2 does not
start when camera is
connected.
• Select the Interface setting from the setup
menu and set the USB option to MTP/PTP,
and try to connect the camera again.
• Camera is off.
• Battery is exhausted.
• USB cable is not properly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information on
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
• Select the Interface setting from the setup
menu and set the USB option to MTP/PTP,
and try to connect the camera again.
• With some PictBridge-compatible printers,
the PictBridge startup screen may not be
displayed and it may be impossible to print
pictures when Auto is selected for the
Charge by computer option in the setup
menu. Set the Charge by computer option
to Off and reconnect the camera to the
printer.
E 23,
Pictures to be printed are
not displayed.
• Memory card contains no pictures. Replace
the memory card.
• Remove the memory card to print pictures
from the internal memory.
Problem
Cause/Solution
A