NEC EXPRESS 320Lb - Manual (Page 23)

Windows 2000 Advanced Server Installation 2-13
Configuring your SNMP Trap Destination and Community Rights
The SNMP Service has been installed on your system. You need to set the trap
destination to your monitoring station(s).
1. At the Windows 2000 desktop, click Start, point to Programs,
Administrative Tools, and click Services. The Services Management
Console screen displays.
2. Right click SNMP Service. Click Properties. The Properties panel displays.
3. Click the Agent tab. Setup your contact and location.
4. Click the Trap Tab. Enter Trap Destinations associated with the public
community.
5. Click the Security Tab. Add a “READ WRITE community right” by
clicking on the Add button.
Note: The ESMPRO Manager will be able to monitor your system
but will not be able to change threshold if you do not set a community
name with the READ WRITE right. Also, it is possible but not
recommended to change the rights of the public community to add the
READ WRITE right, as it represents a security hole.
Your Fault-Tolerant system is now monitored and ready to report events.