NEC EXPRESS 320Lb - Manual (Page 13)

Windows 2000 Advanced Server Installation 2-3
! Press Esc , select Exit , and select Save Changes & Exit . Press Yes at
the Setup Configuration Screen. The BIOS changes are saved and the
system reboots.
Install Windows 2000
The system is now ready for EXPRESSBUILDER to start the Windows 2000
install procedure.
1. Insert the EXPRESSBUILDER CD in the CD-ROM drive.
2. Restart the system by either pressing Ctrl-Alt-Delete or turn system power
off and back on.
3. The EXPRESSBUILDER Main menu screen displays (see the following
figure). Descriptions of the icons on the screen follow the figure.
Setup — Click this icon to perform set-up of server internal
parameters, hardware states, Windows 2000 installation, and several
utilities. Also use Setup if the hard drive being used for installation is
not the factory installed drive.
Tools — Click this icon to individually select and set up the
utilities stored on the EXPRESSBUILDER
CD. Tools sets up the
utility without being influenced by the operating system. (See
Chapter 3, “EXPRESSBUILDER Tools “ for further information on
the utilities.)
Help — Click this icon for a description of EXPRESSBUILDER. It
is suggested you read this before starting Setup.
Exit — Click this icon to terminate the
EXPRESSBUILDER.
SSS
Tools