NEC EXPRESS 320Lb - Manual (Page 21)

Windows 2000 Advanced Server Installation 2-11
Entering your VERITAS Volume Manager
License.
Your system has been configured with a temporary license for VERITAS
Volume Manager. You’ll need to enter your permanent license.
1. Launch the Volume Manager by clicking on Start/ Programs/VERITAS/
VERITAS Enterprise Administrator.
2. Select the menu Tools / System License in “VERITAS Enterprise
Administrator.” The license screen displays.
Note: Your license key certificate is located in the accessory box
shipped with your Fault-Tolerant system.
3. Enter your license number and click the Replace button.
4. Click OK. You license is entered.
5. Close “VERITAS Enterprise Administrator.”
Your permanent license is now in effect.
Setting-up Your Monitoring Facility
Your system includes the ESMPRO Agent installed at the factory. You’ll need
to setup a monitoring station to receive alerts reported by the ESMPRO Agent.
Refer to the ESMPRO User’s Guide located on your EXPRESSBUILDER CD
for detailed information.
Perform the following procedures to install and configure ESMPRO Manager on
your monitoring station.
Enable Boot Monitoring
1. At the startup screen, when prompted, press F2 to enter the BIOS Setup and
enable Boot Monitoring.
! Select Advanced on the BIOS Setup Main Menu.
! Select Monitoring Configuration on the Advanced window and press
Enter .
! Select Boot Monitoring and change the setting to Enabled to enable
Boot Monitoring.
! Press Esc , select Exit , and select Save Changes & Exit . Press Yes at
the Setup Configuration Screen. The BIOS changes are saved and the
system reboots.