See menu, Lock password, Technical information (continued) – Panasonic TQBJ0323-1 User Manual
Page 54: Menu lock password
References
54 ENGLISH
Technical Information (continued)
Cable specifications
(When connected to a personal computer)
Control commands
The following commands are used for control of the projector with a computer. (Operation commands)
Command
Control contents
Remarks
PON
Power on
• The PON command is ignored during lamp ON control.
• If a PON command is received while the cooling fan is operating after the lamp has switched off,
the lamp is not turned back on again straight away in order to protect the lamp.
POF
Power off
AVL
Volume
Parameter:
000 - 063 (Adjustment value 0 - 63)
IIS
Input
Parameter:
VID = VIDEO SVD = S-VIDEO RG1 = COMPUTER 1 IN
RG2 = COMPUTER 2 IN
Q$S
Lamp condition
query
Call back:
0 = Standby 1 = Lamp on control active 2 = Lamp on 3 = Lamp off control active
OSH
AV mute
Turn off the projection and sound temporarily.
Send the command to switch between off and on. (
Do not send the command consecutively.
0 = Off 1 = On
NOTE:
If
•
STANDBY MODE is set to ECO, only PON and Q$S command can be used in the standby mode.
MENU LOCK PASSWORD
To reset the password to the default setting
AAAA, perform the following when the MENU LOCK PASSWORD
request screen is displayed.
1) Press and hold the
control panel and the▲button of the control panel together for at least 2 seconds.
2) Press and hold▼button for at least 2 seconds.
PASSWORD HAS BEEN INITIALIZED. is displayed on the MENU LOCK PASSWORD request screen.
Projector
PC
(DTE)