Panasonic TQBJ0323-1 - Manual (Page 12)

Preparation
12  ENGLISH
Start-up display
The LANGUAGE and INITIAL SETTING menu will be displayed when the projector is turned on for the first time or
after it has been initialized. ( page 41)
Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and environment settings.
NOTE:
When the projector is turned on for the first time, you may be required to adjust the “zoom ring” and “focus ring” • (  page 13)
on the top of the projector body to make the menu screen clearer.
For details, see POSITION THE IMAGE. (
 page 24)
1 To select the desired language.
PLEASE SELECT LANGUAGE.
SELECT
ENTER
INITIAL SETTING
2
ENTER
To proceed to INITIAL SETTING
menu.
1 To select the desired menu.
 INSTALLATION
 HIGH ALTITUDE MODE
2 To change the settings in the
menu.
RETURN
SELECT
ENTER
INSTALLATION
INITIAL SETTING
FRONT/DESK
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft).
OFF
INSTALLATION ( page 17, 39)
FRONT/
DESK
Put it on a desk or floor and project
from the front
FRONT/
CEILING
Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
project from the front
REAR/
DESK
Put it on a desk or floor and project
from the rear (a translucent screen is
required)
REAR/
CEILING
Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
project from the rear (a translucent
screen is required)
HIGH ALTITUDE MODE ( page 9, 39)
OFF
Use in normal environment
(below 1 400 m (4 593 ft) above sea
level)
ON Use at high altitude
(at 1 400 - 2 700 m (4 593 - 8 858 ft)
above sea level)
3
ENTER
NOTE:
To return to • LANGUAGE menu, press [RETURN] in
INITIAL SETTING menu.
LANGUAGE INITIAL SETTING
Preparation