Panasonic TQBJ0323-1 - Manual (Page 41)

Settings
ENGLISH  41
▌ TEST PATTERN
You can use the 7 different test patterns to adjust the
focus of the image.
ENTER
To display the test pattern.

Change pattern
Change
setting
Change
setting
Change pattern
Press [MENU] or [RETURN] to return to the
PROJECTOR SETUP menu, or press repeatedly to
escape the menu mode.
NOTE:
The initial screen is an all white pattern. Only when • TEST
PATTERN is assigned to the [FUNCTION] button, the lattice
pattern will be displayed as the initial screen.
▌ INITIALIZE ALL
You can reset all of the customized settings in MENU to
the factory default.
If the • [ENTER] is pressed in the INITIALIZE ALL
menu, “ INITIALIZE ALL” will be displayed. Select
OK and press [ENTER], “NOW INITIALIZING... ” is
displayed followed by “ POWER OFF” display.
Select OK and turn the power off according to the
instruction. (All other buttons are deactivated.)
The • LANGUAGE and INITIAL SETTING menu
screen will be displayed when the power is
connected. ( page 12)
NOTE:
The usage time of the projector, lamp runtime and the •
NETWORK settings will not be initialized.
When • PASSWORD in SECURITY menu is activated,
ensure to enter the correct password when initializing.
After • INITIALIZE ALL operation is completed, the password
is reset to the factory default setting and PASSWORD
setting is turned OFF.
IN STANDBY MODE
You can turn ON or OFF the audio output in standby
mode.
Change setting
Change
setting
Change
setting
Change setting
OFF Deactive
ON Active
NOTE:
When • STANDBY MODE is set to ECO, the audio output
cannot be activated in the standby mode, even if ON is
selected.
AUDIO IN SELECT
You can select the AUDIO IN 1 or AUDIO IN 2 terminal
to connect the audio output of the devices connected to
COMPUTER 1 IN or COMPUTER 2 IN.
Change setting
Change
setting
Change
setting
Change setting
AUDIO IN SELECT
COMPUTER1 IN
Select AUDIO IN 1 or
AUDIO IN 2 terminal
COMPUTER2 IN
Select AUDIO IN 1 or
AUDIO IN 2 terminal
Menu operation (continued)