Philips Onis 2 - Manual (Page 33)

Useful tips and maintenance 29
Useful tips and
maintenance
Beeps and melodies
Base station indicator light
Oniso Memo only:
Outside line call melody
•
Someone is calling you on your outside line.
Internal call melody
•
Another handset is calling your handset.
A long alert beep
•
If the b symbol is displayed, your call is about to be interrupted because
the handset battery is discharged.
•
Your call has been cut due to an error concerning the battery, network line,
radio range, etc.
•
The handset that was called (on an internal call) has hung up.
•
The base station is busy and cannot make an outgoing call at the moment.
•
You tried to listen to the outgoing message of the memo recorder and no
outgoing message has been recorded.
•
You tried to listen to messages received on the memo recorder and no
messages have been recorded.
•
You tried switching on the memo recorder and the memo recorder memory
is full.
•
You tried switching on the memo recorder and no outgoing message has
been recorded.
Validation beeps
•
One of the settings of your Oniso has been modified.
•
A phone book entry has been stored or removed.
•
The base station has been set to registration mode.
•
One of the settings of the memo recorder has been modified.
•
When you listen to received messages, the end of a message has been
reached (1 beep), all the messages received have been played (2 beeps).
•
The start or the end of a recorded message is been signalled.
A call waiting tone
•
An outside call arrives while you are in an internal call.
Green, steady.
•
The base station is on.
Green, flashing regularly.
•
An outside call is in progress.
Green, flashing in time with
the ringer.
•
An outside call is incoming.
Red, steady.
•
The memo recorder is on.
Red, flashing
(3 blinks every 2 seconds).
•
The memo recorder has received new messages.
Red, flashing quickly.
•
There is a problem with the memo recorder (it is full, or the time setting has
been erased).