Personalising your telephone, Entering menu mode, Setting the dial mode – Philips Onis 2 User Manual
Page 24: Personalising your telephone 20
Personalising your telephone
20
Personalising your
telephone
You can personalise certain features of your telephone using menu mode.
Entering menu mode
Press the
R
key on the handset.
The
M
symbol is displayed and will stay on as long as you are in menu mode.
The first menu option,
3+21(%22.
will be shown on the display.
To quit menu mode, press
R
once more or press
t
.
Setting the dial mode
This option sets the way your telephone sends numbers to the telephone line. You
can choose one of two dial modes (TONE or PULSE).
Press
R
, then press
+
to display
6(783
. Press
o
.
Press
-
until you reach
',$/ 02'(
then press
o
.
Press
+
or
-
to select
721(
or
38/6(
, then press
o
.
Your handset beeps to indicate that the dial mode has been changed.
Press
R
to leave menu mode.
Note:
(UK only)
Although this equipment can use either loop disconnect (PULSE) or DTMF
signalling (TONE), only the performance of the DTMF signalling is subject to
regulatory requirements for correct operation. It is therefore strongly
recommended that the equipment is set to use DTMF signalling of access to public
or private signalling emergency services. DTMF signalling also provides faster call
set up.
!
"
Tip
You can change the dial mode from PULSE to TONE during a call
by pressing
*
. The dial mode will return to PULSE after the call.