Philips Onis 2 - Manual (Page 27)

Your Phone book and emergency number 23
Making a call using the phone book
Press P .
The first name in the phone book is displayed.
If the phone book is empty, %22. (037< will be displayed.
Press + or - to scroll through the list of names in your phone book.
To see the number associated with the displayed name, press o . The
number will be displayed and will scroll if it is longer than 10 digits. To go
back to the name, press o again.
Press t to dial the name or number displayed.
To quit the phone book without dialling, press P again.
Removing a name and number from your phone book
Press R , then press o .
Press - until you reach 5(029( , then press o .
If the phone book is empty, %22. (037< is displayed.
Press + or - to select a name, then press o to remove that name.
Both the name and the number are removed from your phone book.
The handset beeps and 5(029(' is displayed.
2 ress R to leave menu mode.
The emergency number (Oniso 6310/11)
Storing an emergency number - SOS
You can dial an emergency number automatically by pressing the S key.
You need to enter your emergency number before you can use the S key.
This number can be changed later if required.
Press R , then press - until you reach 626 . Press o .
If there is no emergency number stored, the display will show 180%(5" , and
you can enter the new number directly, as described below.
If an emergency number is already stored, the display will show this number.
You have to delete this number using + before you can enter a new one.
Enter the number using the handset keypad (max. 23 digits).
If you want your Oniso to pause while dialling the number (for example, after
an international dialling code prefix), press the
B
key to insert a pause. A
dash will appear between the digits on the display to show where the pause
will be inserted.
Press o to store the new emergency number.
A beep confirms that the emergency number has been saved.
2 ress R to leave menu mode.
!
!
"
!
"