Philips Onis 2 - Manual (Page 25)

Personalising your telephone 21
Selecting the ringer melody and volume
You can change the ringer melody and volume of both the handset and the base
station. There are three possible ringer melodies ( 0(/2'< , 0(/2'< or
0(/2'< and three volume options ( /28' , 62)7 or 2)) ).
Handset ringer
Press R , then press - until you reach 5,1*(56 . Press o .
Press - until you reach +$1'6(7 3UHVV o .
Press + or - to scroll through the melody options.
The displayed melody is played on the handset ringer until you scroll to
another melody, or you leave menu mode.
Press o to choose a melody.
A beep indicates that the melody has been selected.
Press + or - to scroll through the volume options. Press o to choose
an option.
A beep indicates that the volume option has been selected.
Press R to leave menu mode.
Base station ringer
To change the ringer melody and volume of the base station, proceed as for
the handset. In step press - until you reach %$6( .
Using the battery saver
Use the battery saver if you want to use the handset away from the base station for
a long period of time.
Switching on the battery saver
Press and hold th A o key for 2 seconds.
Your handset will beep and switch to battery saver mode.
Note:
In battery saver mode the handset will not ring. However, if someone calls,
the base station will ring.
Switching off the battery saver
•
The battery saver will switch off as soon as you press a key.
•
The battery saver will also switch off if you place your handset on the base
station. The handset will start to recharge if necessary.
!
"
#
$
2